Back to Top

1
Hi, Guest!
  • TOP SAFE
  • FLAME ARRESTER (END OFF LINE TYPE)

FLAME ARRESTER (END OFF LINE TYPE)

Update Terakhir
:
01 / 12 / 2019
Min. Pembelian
:
1 Unit
Harga
CALL
PERALATAN INSTRUMENT, ELECTRICAL, MECHANICAL, TOOLING, MEASUREMENT
( PERALATAN UKUR) SOLDERING & DESOLDERING

LARISSA TECHNOLOGY
Jl. Raya Alternatif Cibubur Km. 4, Cibubur 17435
Phone : 021 - 22813460 ; Fax : 021 - 84598635
No. WA : 0878 7304 1438 ; 0856 9498 2722
Email : [email protected]

www.larissatechnology.com

Detail FLAME ARRESTER (END OFF LINE TYPE)

FLAME ARRESTER
(Explosion Proof End Off Line Flame Arrester Type)

MODEL : KSFE & KSFF
BRAND : TOP SAFE
ORIGIN : KOREA

Specification : 
* Model : KSFE & KSFF
* Size : 2" ~ 12"
* Material : Alumunium / Carbon Steel / Stainless Steel
* Gas Group : IIA, IIB, IIC

Introduction Product :
The KSFE flame arrester are designed, manufactured and tested according to
API 2000 and BS 7244 ( British Standard Specification) code and EN 12874.
The units allow free venting in combination with flame protection for vertical
vent application. They prevent flame propagation by absorbing and dissipating
heat using spiral wound crimped ribbon 316LSS flame cells.
The KSFE unit gives the protection needed. For size 4” and under after ignition
of the out flowing gases a fusible element melts, thee spring loaded cover
automatically opens and the full surface of the flame arrester is exposed so that
the flame arrester element will not attain the ignition temperature through heat
absorption. Housing construction are Aluminum, Cast Iron, Cast Steel, 304SS and
316LSS. Size are from 20mm through to 300mm. Cast iron and cast steel units are
epoxy coated both inside and outside.
Installed in the end of nozzle of the several kinds of the flammable low pressure
storage tank (the ignition point below 65 deg C) with easy coupling, it is the explosion
proof and deflagration proof which blocks the influx of flame ignited externally into
the tank.

 

 

Tampilkan Lebih Banyak
larissa technology
larissa technology

LARISSA TECHNOLOGY

Anggota PREMIUM 9 Tahun
Ruko Kawasan Niaga Citra Grand Blok R7 No.30Jln. Raya Alternatif Cibubur KM. 4, Cibubur 17435, Cibubur, Jatisampurna
Indonesia 17435
Cibubur, Jatisampurna
19 / 10 / 2021
Hubungi Kami

Detail FLAME ARRESTER (END OFF LINE TYPE)

FLAME ARRESTER
(Explosion Proof End Off Line Flame Arrester Type)

MODEL : KSFE & KSFF
BRAND : TOP SAFE
ORIGIN : KOREA

Specification : 
* Model : KSFE & KSFF
* Size : 2" ~ 12"
* Material : Alumunium / Carbon Steel / Stainless Steel
* Gas Group : IIA, IIB, IIC

Introduction Product :
The KSFE flame arrester are designed, manufactured and tested according to
API 2000 and BS 7244 ( British Standard Specification) code and EN 12874.
The units allow free venting in combination with flame protection for vertical
vent application. They prevent flame propagation by absorbing and dissipating
heat using spiral wound crimped ribbon 316LSS flame cells.
The KSFE unit gives the protection needed. For size 4” and under after ignition
of the out flowing gases a fusible element melts, thee spring loaded cover
automatically opens and the full surface of the flame arrester is exposed so that
the flame arrester element will not attain the ignition temperature through heat
absorption. Housing construction are Aluminum, Cast Iron, Cast Steel, 304SS and
316LSS. Size are from 20mm through to 300mm. Cast iron and cast steel units are
epoxy coated both inside and outside.
Installed in the end of nozzle of the several kinds of the flammable low pressure
storage tank (the ignition point below 65 deg C) with easy coupling, it is the explosion
proof and deflagration proof which blocks the influx of flame ignited externally into
the tank.

 

 

Tampilkan Lebih Banyak
Kontak Kami