Back to Top

1
Hi, Guest!

FLAME ARRESTER (IN LINE TYPE)

Update Terakhir
:
19 / 12 / 2019
Min. Pembelian
:
1 Unit
Harga
CALL
PERALATAN INSTRUMENT, ELECTRICAL, MECHANICAL, TOOLING, MEASUREMENT
( PERALATAN UKUR) SOLDERING & DESOLDERING

LARISSA TECHNOLOGY
Jl. Raya Alternatif Cibubur Km. 4, Cibubur 17435
Phone : 021 - 22813460 ; Fax : 021 - 84598635
No. WA : 0878 7304 1438 ; 0856 9498 2722
Email : [email protected]

www.larissatechnology.com

Detail FLAME ARRESTER (IN LINE TYPE)

FLAME ARRESTER
(Explosion Proof In Line Flame Arrester Type)

MODEL : KSFI
BRAND : TOP SAFE
ORIGIN : KOREA

Specification : 
* Model : KSFI
* Size : 1/2" ~ 18"
* Connection: Flange # ANSI 150
* Material: Alumunium / Carbon Steel / Stainless Steel
* Gas Group : IIA, IIB, IIC
 
Introduction Products : 
The model KSFI inline flame arrester is designed, manufactured and tested
according to API 2000 and EN 12874.
The unit are passive devices with no moving parts.
They prevent the propagation of flame from the exposed side of the unit to
the protected side by the use of a 316L stainless steel crimped metal ribbon
type flame cell element.
This construction produces a matrix of uniform opening that are carefully
constructed to quench the flame by absorbing the heat.
This provides an extinguishing barrier to the ignited vapor mixture.
 
The KSFI flame arrestors have specifically designed heat transfer
Characteristics for slow moving flames and low medium pressure fronts
(low to medium deflagration).
Inline flame arresters can be installed either vertically or horizontally within
a designated distance from the potential ignition extras.
 
The standard flame cell is suitable for NEC group D or IEA IIA gases.
Cells for other gas groups are available as additional extras.
 
The flame arresters are available with either aluminium, nodular iron,
cast steel, 304SSss, 316SS and 316LSS housings, Iron and steel housings
are supplied epoxy coated.
Sizes range from 15mm to 600mm and available upon request.
Standard flanges are ANSI 150lb and other connections are available
upon request.

 

Tampilkan Lebih Banyak
larissa technology
larissa technology

LARISSA TECHNOLOGY

Anggota PREMIUM 9 Tahun
Ruko Kawasan Niaga Citra Grand Blok R7 No.30Jln. Raya Alternatif Cibubur KM. 4, Cibubur 17435, Cibubur, Jatisampurna
Indonesia 17435
Cibubur, Jatisampurna
19 / 10 / 2021
Hubungi Kami

Detail FLAME ARRESTER (IN LINE TYPE)

FLAME ARRESTER
(Explosion Proof In Line Flame Arrester Type)

MODEL : KSFI
BRAND : TOP SAFE
ORIGIN : KOREA

Specification : 
* Model : KSFI
* Size : 1/2" ~ 18"
* Connection: Flange # ANSI 150
* Material: Alumunium / Carbon Steel / Stainless Steel
* Gas Group : IIA, IIB, IIC
 
Introduction Products : 
The model KSFI inline flame arrester is designed, manufactured and tested
according to API 2000 and EN 12874.
The unit are passive devices with no moving parts.
They prevent the propagation of flame from the exposed side of the unit to
the protected side by the use of a 316L stainless steel crimped metal ribbon
type flame cell element.
This construction produces a matrix of uniform opening that are carefully
constructed to quench the flame by absorbing the heat.
This provides an extinguishing barrier to the ignited vapor mixture.
 
The KSFI flame arrestors have specifically designed heat transfer
Characteristics for slow moving flames and low medium pressure fronts
(low to medium deflagration).
Inline flame arresters can be installed either vertically or horizontally within
a designated distance from the potential ignition extras.
 
The standard flame cell is suitable for NEC group D or IEA IIA gases.
Cells for other gas groups are available as additional extras.
 
The flame arresters are available with either aluminium, nodular iron,
cast steel, 304SSss, 316SS and 316LSS housings, Iron and steel housings
are supplied epoxy coated.
Sizes range from 15mm to 600mm and available upon request.
Standard flanges are ANSI 150lb and other connections are available
upon request.

 

Tampilkan Lebih Banyak
Kontak Kami